Renault Twingo
Vehicle description
The Renault Twingo is a well-known car on European roads. In its last generation it also received all-electric propulsion, earning it a spot in the Avant2Go fleet. It boasts top agility, transparency (the driver is also assisted by a rear view camera), ease of driving and extremely favorable urban energy consumption, which allows a completely decent electric range. Perhaps the biggest advantage of the electric Twingo is the fast charging with alternating current (AC), which can run at 22 kilowatts of power. Thus, the battery can be charged up to 80 percent in 45 minutes. And last but not least, every Avant2Go Twingo is made in our country - in Revoz in Novo mesto.
Technical details
Battery type | Lithium-ion |
Battery capacity | 21.3 kWh |
Electric range | 135 km |
Charging time (22 kW AC) | 1h 15min (from 0 to 100%) |
Maximum power | 60 kW / 82 hp |
Acceleration to 100 km/h | 12.6 s |
Top speed | 135 km/h |
Length | 3.62 m |
Width | 1.65 m |
Height | 1.54 m |
Starting the Vehicle
To start the vehicle, you will need the vehicle key, which is located in the glove compartment on the passenger side.
Ensure that the gear lever is in the "P" (Park) position and press the brake pedal and turn the key all the way to the stop until you hear an audible warning (a beep).
Battery Charge Status
You can monitor the battery charge on the dashboard. Below the charge indicator, you'll find the estimated vehicle range in kilometers (km), which is influenced by your current driving style and various external factors, such as temperature and other active devices in the vehicle.
When the battery charge reaches 20%, the vehicle will alert you with a beep.
Adjusting the Steering Wheel and Mirrors
The steering wheel can be adjusted for height and reach. To do this, push down the lever located on the lower part of the steering column.
To adjust the mirrors, use the rotary knob on the driver's door. To adjust the left mirror, rotate the knob to the left and then move the knob to position the left mirror. The same process applies for the right mirror.
Changing Gears
All our vehicles are equipped with automatic transmission. To change gears, hold the brake and move the gear lever to the desired position:
P (Park): Used when parking, starting, or stopping the vehicle.
R (Reverse): Used for reversing.
N (Neutral): Used in situations such as at a car wash.
D (Drive): Used for driving forward.
B (Recuperation): Increases the strength of regenerative braking. When you release the accelerator pedal, the car will brake harder while restoring more energy back to the battery.
Driving Modes
Located below the temperature control knob is the ECO button. Press this button to turn ECO mode on or off.
ECO mode reduces battery consumption but limits the vehicle's top speed to 110 km/h.
Charging the Vehicle
To charge the vehicle, retrieve the appropriate cable from the trunk. Manually open both charging flaps (external and internal) on the passenger side of the vehicle and connect one end of the cable to the vehicle and the other end to the charging station.
To stop charging, press the vehicle unlock button on the physical key. Then, unplug the cable from the vehicle and from the charging station. After charging is complete, store the cable in the trunk and close both charging flaps.
Ending the Trip
When you finish your ride, move the gear lever to P (Park) and apply the handbrake.
If you do not wish to end the rental yet, take the vehicle key with you and lock the vehicle using the button on the key.
If you want to end the rental, return the vehicle key to its place by inserting the key fob/chip into the illuminated orange key box located in the glove compartment on the passenger side.
Next, lock the vehicle via the Avant2Go app and follow the steps to complete the rental process.